Yealink CP920 User Guide
76
Note
Intercom is not available on all servers. Contact your system administrator for more information.
Topics
Placing an Intercom Call
Picking Up an Incoming Call of the Target Extension
Answering an Intercom Call
Placing an Intercom Call
To use the intercom feature, ask your system administrator to set an Intercom key for your phone.
Topics
Placing an Intercom Call to the Target Extension
Placing an Intercom Call to the Target Extension
You can place an intercom call when the phone is idle or during a call. The target phone plays a warning tone and auto-
matically answers the call in speakerphone (hands-free) mode by default.
When the target phone has an active call, the intercom call is answered automatically after the active call ends.
Before You Begin
Check with your system administrator if the Intercom key has set for your phone.
Procedure
1. Tap the intercom key.
2. To end the intercom call, tap the intercom key again or End Call.
Picking Up an Incoming Call of the Target Extension
When a target extension receives an incoming call, you can pick up the incoming call by pressing the Intercom key.
Check with your system administrator to find out if this feature is available on your phone.
Before picking up an incoming call, make sure that the directed call pickup code has been configured either for an
Intercom key or for Call Pickup feature in advance.
Note
If the directed call pickup code is not set, the phone will place a call to the target extension instead of picking up an incom-
ing call of the target extension when you tap the intercom key.
Topics
Picking Up a Remote Call by Intercom Key
Picking Up a Remote Call by Intercom Key
Before You Begin
The directed pickup code has set for Call Pickup feature by your system administrator in advance.
Procedure
1. Tap the Intercom key to pick up the incoming call directly.
To Next Page
Loading...
