Yealink CP920 User Guide
60
Joining Two Calls in a Conference
Joining a Transfer Target and a Transferee into a Conference
Joining an Incoming Call to a Conference
Creating a Hybrid UC Meeting
Holding or Resuming a Conference Call
Muting or Unmuting a Conference Call
Splitting a Conference Call
Managing Conference Participants
Ending a Conference Call
Setting Up a Local Conference Call
Procedure
1. Place a call to the first party.
2. When the first party answers the call, tap Conf to place a new call.
3. Enter the number of the second party to dial out.
The active call is placed on hold.
4. When the second party answers the call, tap Conf again to join all parties in the conference.
Joining Two Calls in a Conference
You can invite a held call into a conference call with the active call.
Procedure
1. Place two or more calls on the phone.
2. Select the desired call for a conference and ensure that the call is active.
3. Tap Conf.
4. Select the desired hold call, and then tap Send.
The active call and the selected hold call are joined into a conference. If there are multiple hold calls, the other hold
calls remain hold.
Joining a Transfer Target and a Transferee into a Conference
After consulting with the contact you want to transfer a call to, you can also join the two calls in a conference.
Procedure
1. Tap Conf after talking with the contact you want to transfer a call to.
The transferee and the transfer target are joined into a conference.
Related Topic
To Next Page
Loading...
