Yealink CP920 - Disabling the Mobile Contacts Sync Feature; Configuring the Phone Audio Feature; Configuring the Phone Media Feature

Yealink CP920 User Guide
28
Before You Begin
Make sure that the mobile contact sync feature is enabled.
Procedure
1. Navigate to Menu->Directory->Mobile Contacts.
The contacts stored in your mobile phone will display in the Mobile Contacts list.
Related Topic
Enabling the Mobile Contacts Sync Feature
Disabling the Mobile Contacts Sync Feature
You can disable the IP phone to sync your mobile phone contacts.
Procedure
1. Navigate to Menu->Settings->Basic Settings->Bluetooth->Paired Bluetooth Device or tap ->Paired
Bluetooth Device.
2. Tap Option, and then select Detail.
3. Select Off from the Mobile Contacts Sync field.
The mobile contacts directory disappears from the IP phone directory list.
The mobile contacts directory also disappears from the IP phone directory list after deactivating the Bluetooth mode.
Related Topic
Deactivating the Bluetooth Mode
Configuring the Phone Audio Feature
After connecting your Bluetooth-Enabled mobile phone, you can enable the phone audio feature to make/receive a
mobile call using the IP phone. Then the IP phone acts as a hands-free device for your mobile phone. The call is made
through your mobile phone, but the audio is present on and the call control is done by the IP phone.
Procedure
1.
Navigate to Menu->Settings->Basic Settings->Bluetooth->Paired Bluetooth Device or tap ->Paired
Bluetooth Device.
2. Tap Option, and then select Detail->Channel Control.
3. Select Enabled from the Phone Audio field.
4. Tap Save.
Related Topics
Pairing and Connecting the Bluetooth-enabled Mobile Phone
Handling a Mobile Phone Call on the IP phone
Configuring the Phone Media Feature
You can enable the media audio feature to use the IP phone as a Bluetooth speaker for music played on your mobile
phone/PC.
Procedure