Customizing Your Phone
29
1.
Navigate to Menu->Settings->Basic Settings->Bluetooth->Paired Bluetooth Device or tap ->Paired
Bluetooth Device.
2. Tap Option, and then select Detail->Channel Control.
3. Select Enabled from the Media Audio field.
4. Tap Save.
Related Topic
Pairing and Connecting the Bluetooth-enabled Mobile Phone
Handling a Mobile Phone Call on the IP phone
The call is made through your mobile phone, but the audio is present on and the call control is done by the IP phone.
Before You Begin
Make sure that the Bluetooth-Enabled mobile phone is paired and connected to your IP phone.
Procedure
Do the following on the IP phone:
l Place a call. Tap , and then tap Switch to select Mobile Account. Place a call or multiple calls to the mobile con-
tact.
l Answer a call. An incoming call to your mobile phone is also shown on the IP phones, you can answer the call on
the IP phone. The phone will firstly match the contacts in the mobile contacts directory to present the caller/callee
identity when receiving/placing a mobile phone call.
l During the call, you can hold/resume, mute/unmute or end the call on the IP phone.
Related Topics
Pairing and Connecting the Bluetooth-enabled Mobile Phone
Placing Calls
Answering Calls
Ending Calls
Call Mute
Call Hold
Activating the Bluetooth Mode
Editing Device Name of your Phone for Recognition
You can edit the device name of your phone to display in scanning list of other Bluetooth devices.
Before You Begin
Make sure that the Bluetooth mode is activated.
Procedure
1. Navigate to Menu->Settings->Basic Settings->Bluetooth->Edit My Device Information or tap ->Edit My
Device Information.
The phone screen displays the device name and Bluetooth dongle MAC address.
2. Enter the desired name in the Device Name field.
3. Tap Save.
To Next Page
Loading...
