Yealink CP920 - Placing Multiple Calls; Placing a Call with a Speed Dial Key; Speed Dialing a Contact Using a Speed Dial Key; Placing a Call Back to the Last Incoming Number

Yealink CP920 User Guide
48
Note
Your system administrator can enable live dialpad feature, which enables your phone to automatically dial out the phone
number after a period of time without tapping the Send soft key. Check with your system administrator to find out if this
feature is available on your phone.
Placing Multiple Calls
When you are in a call, you can hold your current call and place a new call.
Procedure
1. Do one of the following:
l Tap . The active call is placed on hold.
l Tap Hold to place the original call on hold.
Tap New Call.
2. Enter the desired number or select a contact.
3. Tap Send.
Related Topic
Call Hold
Placing a Call with a Speed Dial Key
You can quickly dial a number which is used frequently or hard to remember by using a speed dial key.
Topics
Setting a Speed Dial Key Manually
Speed Dialing a Contact Using a Speed Dial Key
Speed Dialing a Contact Using a Speed Dial Key
Before You Begin
Check with your system administrator if the Speed Dial key has set for your phone.
Procedure
1. Tap a Speed Dial key when the phone is idle.
Placing a Call Back to the Last Incoming Number
You can place a call back to the last incoming number quickly by using a Recall key.
Topics
Recalling a Contact
Recalling a Contact
Before You Begin
Check with your system administrator if the Recall key has set for your phone.
Procedure