Call Features
55
Call Mute
You can mute the microphone of the active audio device during an active call so that the other party cannot hear you.
Muting/Unmuting Audio
When you are in a call, you can mute the audio, so that you can hear the other person, but he/she cannot hear you.
Procedure
1. Tap the Mute touch key during a call.
2. Tap the Mute touch key again to unmute the call.
Tip
You can also mute the microphone while the phone is dialing or ringing, so that the other party cannot hear you when the
call is set up.
Keep Mute
In a call center or meet room, if incoming calls are answered automatically, the callers may hear your discussion with
your colleagues. You can mute the phone in an idle state to prevent this unintended situation. The mute state of your
phone persists across calls. The phone stays in the mute state until you unmute the microphone manually or until the
phone restarts.
Procedure
1. Tap the Mute touch key when the phone is idle.
2. Tap the Mute touch key again to deactivate the mute state.
Call Hold
You can place an active call on hold and resume the call when you are ready. When you place a call on hold, your IP
PBX may play music to the other party while waiting.
Topics
Holding a Call
Resuming a Held Call
Swapping Between Active and Held Calls
Holding a Call
Procedure
To Next Page
Loading...
