Yealink CP920 - Enabling Anonymous Call; Placing an Anonymous Call

Yealink CP920 User Guide
50
Topics
Enabling Anonymous Call
Placing an Anonymous Call
Enabling Anonymous Call
Before You Begin
Check with your system administrator if the anonymous call on code or off code is required. If required, get it from
your system administrator.
Procedure
1. Navigate to Menu->Features->Anonymous Call
2. Select Enabled from the Local Anonymous field.
3. (Optional.) Select the desired value from the Send Anonymous Code field.
4. (Optional.) Enter the anonymous call on code and off code respectively in the On Code and Off Code field.
5. Tap Save.
Placing an Anonymous Call
Before You Begin
Enable anonymous call for a specific line.
Procedure
1. Select the anonymous line to place a call.
The callee is prompted with an incoming call from anonymity.
If the callee enables anonymous rejection feature, you may be prompted that the callee does not accept calls from an
anonymous number.