Call Features
63
1. Place a call to the first party.
2. Tap Conf to place a new call.
The active call is placed on hold.
3. Enter the number of the second party, and then tap or Send.
4. When the second party answers the call, tap Conf to add the second party to the conference.
5. Tap Conf to place a new call.
The conference call is placed on hold.
6. Enter the number of the new party, and then press the OK key or Send.
7. When the new party answers the call, tap Conf to add the new party to the conference.
8. Repeat steps 5 to 7 until you add all parties.
Note
The procedures for setting up a network conference call on specific servers may be different. Contact your system admin-
istrator for more information.
Recording Using a USB Flash Drive
You can record active calls onto a USB flash drive connected to your IP phones, and the recordings are saved as *.wav
files.
Recording using a USB flash drive is not available by default. Check with your system administrator to find out if this
feature is available on your phone.
Note
For more information on how to attach a USB flash drive, please refer to the Quick Start Guide for your IP phone on your
phone's support page on Yealink Support.
The size of a single recording file should be less than 2G.
Topics
Recording a Call
Idle Recording
Managing a Call While Recording
Playing a Recorded Call
Pausing/Resuming a Playback
Fast Forwarding/Rewinding a Playback
Stopping a Playback
Deleting a Recorded Call
Viewing the Available Recording Time
Recording a Call
You can record active calls on the phone. You cannot record calls when there are no connected calls, when you place
a new call, transfer a call or initiate a conference, or when you have an incoming call.
Important
Before call recording, especially those involving PSTN, it is necessary to know about the rules and restrictions of any gov-
erning call recording in the country where you are.
It is also very important to inform all the call parties that you are recording and ask for their consent before recording the
conversation.
Procedure
To Next Page
Loading...
