Yealink CP920 User Guide
26
Activating the Bluetooth Mode
Procedure
1. Navigate to Menu->Settings->Basic Settings->Bluetooth or tap .
2. Select On from the Bluetooth field.
3. Tap Save.
The IP phone scans the available Bluetooth devices automatically.
Deactivating the Bluetooth Mode
You can deactivate the Bluetooth mode when you no longer use a Bluetooth device.
Procedure
1. Navigate to Menu->Settings->Basic Settings->Bluetooth or tap .
2. Select Off from the Bluetooth field.
3. Tap Save.
The Bluetooth device will not be connected anymore, but it will still be paired. When you activate the Bluetooth mode
again, the paired Bluetooth device will appear in the Paired Bluetooth Device list.
Pairing and Connecting the Bluetooth-enabled Mobile Phone
You can pair with countless mobile phones with your IP phones but only one mobile phone can be connected at a
time.
Before You Begin
Make sure that the Bluetooth-enabled mobile phone is discoverable.
Procedure
1. Navigate to Menu->Settings->Basic Settings->Bluetooth or tap .
2. Tap Scan to search for the Bluetooth-enabled mobile phone.
3. Find your Bluetooth-enabled mobile phone, and then tap Connect.
The IP phone will prompt the connection passkey on the phone screen, as shown below:
4. Make sure your mobile phone is showing the same passkey, and then tap OK on both mobile phone and IP phone.
A message is displayed on the phone screen:
To Next Page
Loading...
