Yealink CP920 - Deleting a Paging Group; Sending Multicast Paging; Setting a Paging Group

Call Features
67
Topics
Receiving Multicast Paging
Managing a Paging Call
Sending Multicast Paging
Yealink IP phone supports up to 31 groups for paging. You can assign a label to each group to identify the phones in
the group, such as All, Sales, or HR.
Note
Multicast RTP is one way only from the sender to the multicast address(es) (receiver). For outgoing RTP multicasts, all other
existing calls on the phone will be placed on hold.
Topics
Setting a Paging Group
Deleting a Paging Group
Sending a Paging by a Multicast Paging Key
Sending Pages by a Paging List Key
Setting a Paging Group
Before You Begin
Get the multicast IP address and port number from your system administrator.
Procedure
1. Tap the paging list key when the phone is idle.
If the paging list key is not set, you can also navigate to Menu->Features->Paging List.
2. Select the desired paging group.
The default tag is Empty if it is not configured before.
3. Tap Option, and then select Edit.
4. Enter the multicast IP address and port number (for example, 224.5.6.20:10008) in the Address field.
5. Enter the string that will display on the phone screen in the Label field.
6. Enter the desired channel between 0 and 30 in the Channel field.
7. Tap Save.
8. To set more paging groups, repeat steps 2 to 7.
Deleting a Paging Group
Before You Begin
Check with your system administrator if the paging list key has set for your phone.
Procedure
1. Tap the paging list key when the phone is idle.
2. Select the desired paging group.
3. Tap Option, and then select Delete.
The phone screen prompts you whether to delete the paging group.
4. Tap OK.