Advanced Features
73
Before You Begin
Your system administrator has enabled the group call pickup and set the group call pickup code.
Procedure
1. Tap
The GPickup appears on the phone screen.
2. Tap GPickup on your phone when any phone in the group receives an incoming call.
The call is answered on your phone.
Related Topic
Picking up a Call with a Group Pickup Key
Call Park and Call Retrieve
You can use this feature to park a call, and then retrieve the call either from your phone or another phone. After you
park a call, the call is placed on hold, you can continue the conversation after retrieving it.
The IP phone supports this feature under the following modes:
l FAC mode: park the call to the local extension or a desired extension through dialing the park code.
l Transfer mode: park the call to the shared parking lot through a blind transfer. For some servers, the system will
return a specific retrieve park number (park retrieve code) from which the call can be retrieved after parking suc-
cessfully.
Note
Call park is not available on all servers. Check with your system administrator to find out if it is available on your phone.
Topics
Parking or Retrieving a Call in the FAC Mode
Parking or Retrieving a Call in the Transfer Mode
Parking or Retrieving a Call in the FAC Mode
Your system administrator sets the FAC mode in which you can park and retrieve a call on your phone.
Topics
Parking a Call
Retrieving a Parked Call in the FAC Mode
Parking a Call
Before You Begin
Your system administrator has set call park in the FAC mode.
Procedure
1. During a call, tap Park (You may need to tap the More soft key to see the Park soft key).
The phone will dial the call park code which is pre-configured.
2. Do one of the following:
To Next Page
Loading...
