Yealink CP960 - Page 53

Getting Started
53
Two methods supported by Yealink IP phones in the Wi-Fi protected setup:
 Push Button Configuration (PBC): The user simply has to push the WPS key on both the IP
phone and gateway/router to connect.
 Personal Identification Number (PIN): The user has to enter a WPS PIN generated
randomly by the IP phone on the gateway/router to connect.
Push Button Configuration (PBC)
To connect to the wireless network using PBC method:
1. Tap Settings from the Home screen.
2. Tap Wi-Fi from the Basic block.
3. Turn on Wi-Fi.
The phone will automatically search for available wireless networks in your area.
4. Tap and then tap WPS.
The touch screen prompts “Press the Wi-Fi Protected Setup button on your router. It may
be called “WPS” or contain this symbol:”.
5. Long press the WPS key on your gateway/router.
Once WPS setup is established successfully, the touch screen will prompt “Connected”.
Personal Identification Number (PIN)
To connect to the wireless network using PIN method:
1. Tap Settings from the Home screen.
2. Tap Wi-Fi from the Basic block.
3. Turn on Wi-Fi.
The phone will automatically search for available wireless networks in your area.