Yealink IP Phones Configuring Guide
36
conference phones).
- If you select All Lines, the dial-now rule will apply to all accounts on the phone.
- If you select Current Lines, the dial-now rule will only apply to the current account.
4. Click Save changes to accept the change.
5. Perform auto provisioning on the phone to download above configurations. For more
information on how to perform auto provisioning refer to Downloading Configuration Files
on page 39.
For example, a dial-now rule is configured as "1xx", any entered three-digit string
beginning with 1 will be dialed out automatically.
Configuring the Delay Time for Dial-now Rules
You can configure the delay time for all dial-now rules. That is, you can configure your phone to
automatically dial out the phone numbers which match a dial-now rule, after the designated
delay time.
To configure the delay time for dial-now rule via CommPortal phone configurator:
1. Click Features->Dial Plan.
2. Select the desired value from the Time Out for all Dial-Now Rules field.
3. Click Save changes to accept the change.
To Next Page
Loading...
Need help?
General
