EasyManuals Logo

Yealink T19P-E2 Configuring Guide

Yealink T19P-E2
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #67 background imageLoading...
Page #67 background image
Advanced Phone Features
57
- If you select New Call, press the enhanced monitor extension key to place a new call
to the monitored number.
4. Click Save changes to accept the change.
5. Perform auto provisioning on the phone to download above configurations. For more
information on how to perform auto provisioning, refer to Downloading Configuration Files
on page 39.
Intercom and Push-to-Talk
Intercom is a useful feature in an office environment to quickly connect with the operator or the
secretary. You can short press the Intercom/PTT key to automatically connect with a
pre-configured target extension for outgoing intercom calls, and the target extension will
automatically answer incoming intercom calls by default.
Push-to-talk is a variant of Intercom, you need to press and hold the Intercom/PTT key during
the push-to-talk call. As soon as the key is released, the push-to-talk call is disconnected.
Note
You cannot configure Intercom and Push-to-Talk via CommPortal phone configurator for
SIP-T19(P) E2/W80B phones.
Enabling Push to Talk Mode
You can enable or disable the push-to-talk mode for the phone. If the push-to-talk mode is
enabled, you can long press the Intercom/PTT key for 1.5 seconds to automatically connect with
a pre-configured target extension, and the target extension will automatically answer incoming
intercom calls by default. You need to press and hold the Intercom/PTT key during the
push-to-talk call and release it to end the call.
If the push-to-talk mode is disabled, the Intercom/PTT key works as an Intercom key only.
Note
The push-to-talk mode is not applicable to SIP T19(P) E2, CP920, CP960, W60B, and W80B
phones.
To enable push-to-talk mode via CommPortal phone configurator:
1. Click Features->Intercom.

Table of Contents

Other manuals for Yealink T19P-E2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink T19P-E2 and is the answer not in the manual?

Yealink T19P-E2 Specifications

General IconGeneral
Network10/100 Mbps Ethernet
PoEYes
ProtocolSIP
Wall MountableYes
SIP Accounts1
Lines1
Display132x64 pixel graphical LCD
Voice CodecsG.711(A/µ), G.729AB, G.726, iLBC

Related product manuals