Yealink T19P-E2 Configuring Guide

Advanced Phone Features
55
Advanced Phone Features
This chapter provides operating instructions for the advanced features of the IP phone. Topics
include:
 Enhanced Monitor Extension
 Intercom and Push-to-Talk
 Multicast Paging
 DTMF
 Call Jump
Enhanced Monitor Extension
You can use enhanced monitor extension feature to monitor a specific line for status changes on
the phone.
Note
Enhanced monitor extension feature is not applicable to SIP-T19(P) E2, CP920, SIP-T56A,
SIP-T58A/V, W60B, and W80B phones.
Configuring an Enhanced Monitor Extension key
You can configure an enhanced monitor extension key on the phone to monitor the status of a
desired phone number. You can press an enhanced monitor extension key to dial out the
monitored phone number when the monitored line is idle.
To configure an enhanced monitor extension key via CommPortal phone configurator:
1. Click Programmable Keys - Line Key->Key X.
2. Select Enhanced Monitor Extension from the Soft key action field.
3. Select the desired line to apply this feature from the Line field.
4. Enter the phone number or extension you want to monitor in the Extension field.
5. Enter the string that will appear on the LCD screen in the Label field.

Yealink T19P-E2 Specifications

General

Network	10/100 Mbps Ethernet
PoE	Yes
Protocol	SIP
Wall Mountable	Yes
SIP Accounts	1
Lines	1
Display	132x64 pixel graphical LCD
Voice Codecs	G.711(A/µ), G.729AB, G.726, iLBC