Yealink IP Phones Configuring Guide
52
5. Enter the string that will appear on the LCD screen in the Label field.
6. Click Save changes to accept the change.
7. Perform auto provisioning on the phone to download above configurations. For more
information on how to perform auto provisioning, refer to Downloading Configuration
Files on page 39.
When the target phone number receives an incoming call, you can press the directed pickup key
to answer the call on your phone.
Picking up a Call
When the target number (for example: 9702981675) receives an incoming call, you can dial the
directed pickup code followed by the target number (for example: *129702981675) or press the
directed pickup key (if configured) to pick up the parked call directly.
Group Pickup
Group call pickup is used for picking up incoming calls within a pre-defined group. When any
phone within a predefined group of phones receives an incoming call, you can pick up that call
easily on the phone.
Configuring a Directed Pickup key
You can set a group pickup key, and use it to pick up incoming calls for your group.
To configure a group pickup key via the CommPortal phone configurator:
1. Click Programmable Keys - Line Key->Key X.
2. Select Group Pickup from the Soft key action field.
To Next Page
Loading...
Need help?
General
