Yealink T19P-E2 Configuring Guide

Basic Phone Features
43
Basic Call Features
The SIP IP phone is designed to be easily used like a regular phone on a public switched
telephone network (PSTN). You can place calls, answer calls, transfer a call to someone else, or
conduct a conference call.
Most features on the phones are intuitive. So this chapter only provides the detailed instructions
about a few features that may not be so intuitive. Topics include:
 Do Not Disturb
 Transferring Calls
 Local Conference Call
 Call Park and Call Retrieve
 Directed Pickup
 Group Pickup
If you require additional information or assistance with your new phone, contact your system
administrator.
Do Not Disturb
You can use DND to reject incoming calls automatically on the phone. The prompt message "n
New Missed Call(s)" ("n" indicates the number of missed calls) will appear on the LCD screen,
and callers will receive a busy message. All calls you receive while DND is enabled are logged to
your missed calls list.
Choosing a DND Mode
You can enable DND for the phone system, or you can customize DND for each or all accounts.
Note
The SIP-T19 (P) E2, CP920 and CP960 phones only support one account at most. So that DND is
effective for the phone system only.
You cannot configure DND via CommPortal phone configurator for W60B/W80B phones.
There are two DND modes:
 Phone: DND is effective for the phone system.
 Custom: DND can be configured for each or all accounts
To choose the DND mode via CommPortal phone configurator:
1. Click Features-> DND & Forward.

Yealink T19P-E2 Specifications

General

Network	10/100 Mbps Ethernet
PoE	Yes
Protocol	SIP
Wall Mountable	Yes
SIP Accounts	1
Lines	1
Display	132x64 pixel graphical LCD
Voice Codecs	G.711(A/µ), G.729AB, G.726, iLBC