Yealink IP Phones Configuring Guide
46
To perform a semi-attended transfer:
1. Press the Transfer soft key during a call.
2. Do one of the following:
Enter the number you want to transfer the call to.
Press the Directory soft key to select the desired contact.
3. Press the OK key or Send.
4. Do one of the following:
When you hear the ringback tone, press the Transfer soft key to finish a
semi-attended transfer.
After the contact answers the call, press the Transfer soft key to finish an attended
transfer.
Local Conference Call
Setting Up a Local Conference Call
The IP phones support three-way (including yourself) conference call.
To set up a conference call:
1. Place a call to the first party.
2. When the first party answers the call, press the Conference (Conf) soft key to place a new
call.
The active call is placed on hold.
3. Enter the number of the second party and press the Send soft key.
4. When the second party answers the call, press the Conference (Conf) soft key again to join
all parties in the conference.
Joining Two Calls in a Conference
You can select a hold call to join into a conference call with the active call.
To join two calls in a conference:
1. Place two or more calls using the same or different accounts on the phone.
2. Select the call for a conference and ensure that the call is active.
3. Press the Conference (Conf) soft key.
4. Select the desired hold call, and then press the Send soft key.
To Next Page
Loading...
Need help?
General
