Yealink VC110 - Page 108

Administrator’s Guide for Yealink VC110 Video Conferencing Endpoint
92
To configure Static NAT for SIP account via web user interface:
1. Click on Account->SIP Account.
2. Select StaticNat from the pull-down list of NAT Traversal.
3. Click Confirm to accept the change.
To configure Static NAT for SIP IP call via web user interface:
1. Click on Account->SIP IP Call.
2. Select StaticNat from the pull-down list of NAT Traversal.
3. Click Confirm to accept the change.