Yealink VC110 - Hiding IP Address

Configuring Endpoint Settings
183
2. Select desired value from the pull-down list of Automatic Sleep Time.
3. Click Confirm to accept the change.
To configure the automatic sleep time via the remote control:
1. Select Menu->Basic.
2. Select desired value from the pull-down list of Automatic Sleep Time.
3. Press the Save soft key to accept the change.
Hiding IP Address
The status bar of the display device displays IP address. You can choose to hide IP address on
the status bar.
The hide IP address parameter is described below:
Parameter
Description
Configuration Method
Hide IP address
Enables or disables the endpoint to
hide IP address.
Default: Disabled
Web User Interface