Yealink VC110 - Configuring Safe Mode Call

Administrator’s Guide for Yealink VC110 Video Conferencing Endpoint
268
2. Select the desired value from the pull-down list of Abnormal Call Answering.
3. Click Confirm to accept the change.
Configuring Safe Mode Call
Safe Mode Call feature is used to verify whether the incoming H.323 call is coming from a video
conferencing endpoint.
The Safe Mode Call parameter on the endpoint is described below:
Parameter
Description
Configuration Method
Safe Mode Call
Enables or disables the Safe Mode
Call feature
 Disabled—Answer incoming
H.323 calls directly without
validation.
 Enabled—Verify whether the
incoming H.323 call is coming
from a video conferencing
endpoint. If it is, the VC110
video conferencing endpoint
will answer it. If not, the
incoming call will be rejected.
Default: Enabled
Web User Interface