Administrator’s Guide for Yealink VC110 Video Conferencing Endpoint
274
2. Click Reset to Factory Setting in the Reset to Factory field.
The web user interface prompts the message “Reset the system?”.
3. Click Confirm to confirm the resetting.
To reset the endpoint via the remote control:
1. Select Menu ->Advanced (default password: 0000)->Reboot & Reset.
2. Select Reset, and then press .
The display device prompts” Reset to Factory? ”
3. Select OK, and then press .
The endpoint reboots automatically. The endpoint will reset to factory sucessfully after
startup.
To reset the endpoint via the rest key on the VC110 all-in-one unit:
Using tiny objects (for example, the paper clip) to press and hold the reset button for 15
seconds until the screen turns black.
Do not power off the endpoint during the factory restore process. The endpoint reverts to the
default factory settings and restarts automatically. This will take a few minutes.
SNMP
SNMP (Simple Network Management Protocol) is an Internet-standard protocol for managing
devices on IP networks. It is used mostly in network management endpoints to monitor
To Next Page
Loading...
