Configuring Call Preferences
155
Account Polling
When you dial account numbers of other endpoint, account polling feature enables your
endpoint to use different call types according to this priority: Cloud platform>H.323
account>SIP account. If you cannot call other endpoints using all your registered accounts, then
this call fails.
Account polling is disabled by default. When you register multiple accounts (2 or more) for your
endpoint, you can enable account polling feature. You can configure account polling feature via
web user interface only.
Account polling parameter on the endpoint is described below:
Enables or disables the account
polling on the endpoint.
Disabled—the endpoint can
only call other endpoint’s
account using the call type
with the highest priority (Cloud
platform>H.323 account>SIP
account).
Enabled—the endpoint will
attempt to call other
endpoint’s account using
different call types according
the priority (Cloud
platform>H.323 account>SIP
account).
Default: Disabled
Remote Control
Web User Interface
To configure account polling via web user interface:
1. Click on Setting->Call Features.
To Next Page
Loading...
