Yealink VC110 - Page 172

Administrator’s Guide for Yealink VC110 Video Conferencing Endpoint
156
2. Select the desired value from the pull-down list of Account Polling.
3. Click Confirm to accept the change.
The following example shows the way calls are placed when account polling is enabled or
disabled.
Scenario:
1. Endpoint A is registered with a Yealink Cloud account and a SIP account.
2. On endpoint A, select Auto from the pull-down list before calling.
3. On endpoint A, dial the account numbers of endpoint B.
Result：
 If account polling is disabled, endpoint A can only use its Cloud account (highest priority)
to call endpoint B.
 If account polling is enabled, endpoint A will use its Cloud account (highest priority) to call
endpoint B first. If this call fails, endpoint A continues to use its SIP account (next priority)
to call endpoint B.