Yealink VC110 - Enabling H.460 Support for H.323 Calls

Administrator’s Guide for Yealink VC110 Video Conferencing Endpoint
142
To configure H.323 account via the remote control:
1. Select Menu->Advanced (default password: 0000) ->H.323.
2. Configure the H.323 account settings.
3. Press the Save soft key to accept the change.
After successful registration, the display device displays , and the LCD
screen of the video conferencing phone displays .
Enabling H.460 Support for H.323 Calls
Yealink video conferencing endpoints support firewall traversal of H.323 calls using H.460
protocols. You must have an H.460 server configured in your environment for this feature to
function properly.
Note
The H.460 firewall traversal parameter is described below:
Parameter
Description
Configuration Method
Gatekeeper Mode
Configures the gatekeeper mode.
 Disabled—the endpoint does
not use a gatekeeper.
 Auto—the endpoint
automatically discovers a
gatekeeper.
 Manual—specify the IP
address and port for the
gatekeeper manually.
Default: Disabled
Remote Control
Web User Interface
If you configure H.323 settings and enable H.460 support, the endpoint ignores Static NAT
settings. For more information on NAT, refer to Static NAT on page 90.