Yealink VC110 - Multiple Preset on

Administrator’s Guide for Yealink VC110 Video Conferencing Endpoint
208
Parameter
Description
Configuration Method
Valid Values: 0-100
Default: 50
Contrast
Configures the contrast of the
camera.
Valid Values: 0-100
Default: 50
Remote Control
Web User Interface
Noise Reduction
(2D)
Specifies the noise reduction (2D)
mode.
 Off
 Low
 Middle
 High
Default: Low
Remote Control
Web User Interface
Hangup Mode
Enables or disables the camera to
flip the image view when camera is
handed at up-side-down position
Default: Off
Remote Control
Web User Interface
Camera Pan
Direction
Configures the pan direction of the
camera.
 Normal
 Reversed
Default: Normal
If the camera reversed mode is
enabled, the camera pan direction
will be reversed when pressing the
left and right navigation keys on the
remote control. In this case, you can
set the camera pan direction to
Reversed.
Remote Control
Web User Interface
Multiple Preset
Enables or disables the multiple
preset feature.
Default: Off
For more information, refer to
Multiple Preset on page 210.
Web User Interface
Camera Map
Enables or disables the preview of
Remote Control