Yealink VC110 - Page 225

Configuring Endpoint Settings
209
Parameter
Description
Configuration Method
camera presets.
Default: On
Note: If it is set to On, you can view
the pre-saved camera presets.
Web User Interface
Clear Preset
Clears all camera presets.
Remote Control
Web User Interface
Reset Camera
Reset the camera settings to factory
defaults.
Note: The camera presets will also
be cleared.
Remote Control
Web User Interface
To configure camera settings via web user interface:
1. Click on Setting->Camera.
2. Configure the camera settings.
3. Click Confirm to accept the change.