Yealink VC110 - Language

Configuring Endpoint Settings
175
To configure the backlight time of the video conferencing phone via web user interface:
1. Click on Setting->General.
2. Select the desired value from the pull-down list of Backlight Time.
3. Click Confirm to accept the change.
Language
The default language of the LCD screen of the display device and the video conferencing phone
is English, and you can change it via the remote control. The video conferencing phone will
detect and use the same language as the display device.
The default language of the web user interface is English. You can change the language of the
web user interface via web user interface. The available languages for endpoint are English,
Chinese Simplified, Chinese Traditional, French, German, Italian, Polish, Portuguese, Spanish,
Turkish and Russian.
The language parameters on the endpoint are described below:
Parameter
Description
Configuration Method
Language
Specifies the language for the web
user interface
Web User Interface
Language
Specifies the language for the LCD
screen of the display device and the
video conferencing phone.
Default: English
Remote Control
To specify the language for the web user interface via web user interface:
1. Click Language at the top of the web page.