Yealink VC110 - Key Tone

Administrator’s Guide for Yealink VC110 Video Conferencing Endpoint
190
2. Enter the desired time in the ReLogOffTime (1-1000min) field.
3. Click Confirm to accept the change.
Key Tone
You can enable the key tone feature for the endpoint to make a keyboard click sound effect (key
tone) when pressing a key on the remote control. If you disable this feature or endpoint ringer
volume is adjusted to 0, the endpoint will not play a key tone when you press the key on the
remote control.
Key tone is configurable via the remote control or web user interface.
The key tone parameter is described below:
Parameter
Description
Configuration Method
Key Tone
Enables or disables the key tone.
Default: On
Remote Control
Web User Interface
To configure the key tone via web user interface:
1. Click on Setting->General.