Administrator’s Guide for Yealink VC110 Video Conferencing Endpoint
226
2. Select the desired value from the pull-down list of Screenshot.
3. Click Confirm to accept the change.
To capture screenshots via web user interface:
1. Click Home->Screenshot when the endpoint is idle or during a call.
To capture screenshots when the endpoint is idle via the remote control:
1. Press .
To capture screenshots during a call via the remote control:
1. Do one of the following:
- Long press .
- Press More soft key to open More screen.
Press or to scroll to Screenshot, and then press to capture screenshot.
Tones
When automatically answering an incoming call, the endpoint will play a warning tone. You can
customize tones or select specialized tone sets (vary from country to country) to indicate
different conditions of the endpoint. The default tones used on the endpoint are the US tone
sets. Available tone sets for the endpoint:
Australia
To Next Page
Loading...
