Administrator’s Guide for Yealink VC110 Video Conferencing Endpoint
294
2. Select the desired level from the pull-down list of Network Address Adapter.
3. Click Confirm to accept the change.
Endpoint Maintenance
How to prevent monitor burn-in?
Refer to your monitor’s documentation for specific recommendations and instructions. The
following guidelines help prevent image burn-in:
Ensure that static images are not displayed for long periods.
Be aware that meetings that last more than an hour without much movement can have the
same effect as a static image.
Configure the automatic sleep time to be 1 hours or less.
Consider decreasing the monitor’s sharpness, brightness, and contrast settings if they are
set to their maximum values.
How to reboot the endpoint?
When you do one of the following, the endpoint will reboot:
Reboot endpoint
Reset endpoint
Upgrade firmware
To Next Page
Loading...
