Yealink VC110 - USB Configuration

Administrator’s Guide for Yealink VC110 Video Conferencing Endpoint
222
3. Select the desired value from the pull-down list of Display2.
4. Click Confirm to accept the change.
USB Configuration
If you have high requirement for data security, you can disable the USB feature. If you disable
the USB feature, you cannot view the videos and screenshots stored in the USB flash driver via
the remote control, and cannot record video or capture screenshots too.
The USB configuration parameter on the endpoint is described below.
Parameter
Description
Configuration Method
USB Enable
Enables or disables the USB feature.
Default: Enabled
Web User Interface
To configure USB configuration via web user interface:
1. Click on Setting->Video & Audio.