Yealink VC110 - Placing a Test Call from the Yealink VC110 Endpoint

Administrator’s Guide for Yealink VC110 Video Conferencing Endpoint
54
page 134.
Placing a Test Call from the Yealink VC110 endpoint
Yealink Demo1 to Yealink Demo3 are three default contacts stored in the local directory.
You can place a test call to the default contact, and the test call will be routed to the Yealink
demo video conferencing endpoint. Yealink demo contacts can help users to test quickly
whether the endpoint is normal after installation.