Endpoint Maintenance
271
Endpoint Maintenance
This chapter provides basic endpoint maintenance, including upgrading firmware, managing
configurations, resetting endpoints and how to monitor network via SNMP. Topics include:
Upgrading Firmware
Importing/Exporting Configuration
Resetting to Factory
SNMP
Upgrading Firmware
The newly released firmware version may add new features. Because of this, Yealink
recommends you to update the latest firmware. You can upgrade the endpoint firmware via web
user interface. The firmware name of the VC110 video conferencing endpoint is: 50.x.x.x.rom (x is
the actual firmware version). You can download the latest firmware version from the Yealink
website.
To upgrade firmware via web user interface:
1. Click on Setting->Upgrade.
2. Click Browse to locate the firmware from your local endpoint.
3. Click Upgrade to upgrade the firmware.
The browser pops up the dialog box “Firmware will be updated. It will take 5 minutes to
complete. Please don't power off!”.
To Next Page
Loading...
