Administrator’s Guide for Yealink VC110 Video Conferencing Endpoint
160
2. Select the desired value from the pull-down list of Auto Dialout Mute.
3. Click Confirm to accept the change.
If Enabled is selected, your video image will display mute icon ( ) when you place a
call.
Call Match
The call match feature allows the endpoint to search for entries automatically from the search
source list based on the entered string. Once matched, the results will be displayed on the
screen. If no list is added to the search source list, the endpoint will not perform a search even if
call match is enabled. For more information on how to search source list in dialing, refer to
Search Source List in Dialing on page 242 .
Parameter of call match on the endpoint is described below:
Enables or disables the call match
feature on the endpoint.
Default: Enabled
Remote Control
Web User Interface
To configure call match via web user interface:
1. Click on Setting->Call Features.
To Next Page
Loading...
