Administrator’s Guide for Yealink VC110 Video Conferencing Endpoint
174
2. Edit the site name in the Site Name field.
3. Click Confirm to accept the change.
The LCD screen of the display device and video conferencing phone will display the
changed site name.
To configure the site name via the remote control:
1. Select Menu->Basic.
2. Edit the site name in the Site Name field.
3. Press the Save soft key to accept the change.
The LCD screen of the display device and video conferencing phone will display the
changed site name.
Backlight of the Video Conferencing Phone
Backlight determines the brightness of the LCD screen display, allowing users to read easily in
dark environments. Backlight time specifies the delay time to turn off the backlight when the
phone is inactive.
You can configure the backlight time as one of the following types:
Always On: Backlight is turned on permanently.
15 s, 30 s, 10 min, 20 min, 30 min, 1 Hour, 2 Hour, 3 Hour, 4 Hour: Backlight is turned off
when the phone is inactive after a preset period of time. It is automatically turned on if the
status of the phone changes or any key is pressed.
The backlight parameter on video conferencing phone is described below:
Configures the backlight time of the
video conferencing phone.
Default: Always On
To Next Page
Loading...
