Yealink VC110 - Output Resolution

Configuring Endpoint Settings
221
Output Resolution
VC110 video conferencing endpoint supports output resolution adjustment. You can adjust
output resolution of primary/secondary display device respectively.
Make sure the display device has connected to the VC110 all-in-one unit before configuration.
The output resolution parameters on the endpoint are described below.
Parameter
Description
Configuration Method
Display1
Configures the output resolution of
primary display device.
 Auto-select the highest output
resolution automatically
 Available output resolutions
(The available resolutions
depend on the display device
you are using)
Default: Auto
Web User Interface
Display2
Configures the output resolution of
secondary display device.
 Auto-select the highest output
resolution automatically
 Available output resolutions
(The available resolutions
depend on the display device
you are using)
Default: Auto
Web User Interface
To configure output resolution via web user interface:
1. Click on Setting->Video & Audio.
2. Select the desired value from the pull-down list of Display1.