Yealink VC110 - Page 121

Configuring Network
105
Parameter
Description
Configuration Method
will reboot to make the change take
effect.
Upload VPN
Config
Uploads the compressed package of
VPN-related files (*.tar) to the
endpoint.
Web User Interface
To configure VPN via web user interface:
1. Click on Network->Advanced.
2. In the VPN block, click Browse to locate the VPN file (*.tar) from your local endpoint.
3. Click Upload to upload the file to the endpoint.
4. Select the desired value from the pull-down list of Active.
5. Click Confirm to accept the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.
6. Click Confirm to reboot the endpoint immediately.