Yealink VC110 - Page 129

Configuring Call Preferences
113
Parameter
Description
Configuration Method
ID
Specifies the ID when registering a
YMS account.
Default: Blank
Remote Control
Web User Interface
Password
Specifies the password associated with
the ID when registering a YMS
account.
Default: Blank
Remote Control
Web User Interface
Server Host
Configures the IP address or domain
name of the Yealink Meeting Server.
Default: Blank
Remote Control
Web User Interface
Port
Configures the port of the Yealink
Meeting Server.
Default: 0
Web User Interface
Outbound
Server/Outbound
Proxy Server
Configures the IP address or domain
name of the outbound proxy server.
Default: Blank
Remote Control
Web User Interface
Remember
Password
Enables or disables the endpoint to
remember the registration
information.
Default: ON
Note: If it is on, other registration
information will be filled automatically
when you enter the ID next time.
Remote Control
To configure Yealink Meeting Server via web user interface:
1. Click on Account->VC Platform.
2. Select Enabled from the pull-down list of Cloud Account.
3. Select Yealink Meeting Server from the pull-down list of Platform Type.