Yealink VC110 - Page 155

Configuring Call Preferences
139
Parameter
Description
Configuration Method
Default: blank
Note: Users can place point-to-point
calls using the extension if both
endpoints are registered with a
gatekeeper.
Gatekeeper Mode
Configures the gatekeeper mode.
 Disabled—the endpoint does
not use a gatekeeper.
 Auto—the endpoint
automatically discovers a
gatekeeper.
 Manual—specify the IP address
and port for the gatekeeper
manually.
Default: Disabled
Remote Control
Web User Interface
Gatekeeper IP
Address
1/Gatekeeper
Server 1
Configures the IP address of the
primary gatekeeper.
Remote Control
Web User Interface
Gatekeeper Port
1/Port
Configures the port of the primary
gatekeeper.
Valid values: Integer from 0 to
65535.
Default: 1719
Remote Control
Web User Interface
Gatekeeper IP
Address
2/Gatekeeper
Server 2
Configures the IP address of the
secondary gatekeeper.
Remote Control
Web User Interface
Gatekeeper Port
2/Port
Configures the port of the primary
gatekeeper.
Valid values: Integer from 0 to
65535.
Default: 1719
Remote Control
Web User Interface
Gatekeeper
Authentication
Enables or disables support for
gatekeeper authentication.
Default: Disabled
Note: When Gatekeeper
Remote Control
Web User Interface