Yealink VC110 - Page 197

Configuring Endpoint Settings
181
Enter the desired time in the End Hour of Day field.
7. Enter the desired offset time in the Offset (minutes) field.
8. Click Confirm to accept the change.
To configure the time and date manually via web user interface:
1. Click on Setting->Date& Time.
2. Select Manual Time from the pull-down list of Time Type.
3. Enter the current date in the Date field.
4. Enter the current time in the Time field.
5. Select the desired value from the pull-down list of Time Format.
6. Select the desired value from the pull-down list of Date Format.