Yealink VC110 - Page 210

Administrator’s Guide for Yealink VC110 Video Conferencing Endpoint
194
You can also specify the desired audio output device via the remote control or the web user
interface.
The audio output device parameter is described below:
Parameter
Description
Configuration Method
Audio Output
Specifies the audio output device for
the endpoint.
Valid values:
 Auto - selects the audio
output device with higher
priority.
 HDMI - selects the built-in
speakerphone of the display
device.
 Line Output - selects the
speakerphone connected to
the Line Out port on the VC110
all-in-one unit.
 VCS Phone - selects the video
conferencing phone.
Default: Auto.
If VCS Phone is selected as the
audio output device manually or
automatically, the audio input
device must be VCS Phone or Line
In+VCS Phone.
Remote Control
Web User Interface
To configure the audio output device feature via web user interface:
1. Click on Setting->Video & Audio.