Yealink VC110 - Page 228

Administrator’s Guide for Yealink VC110 Video Conferencing Endpoint
212
A Preset menu appears.
Moving Local Camera to a Preset Position
You can check whether the camera presets are correct after you set multiple camera preset
positions.
To use a camera preset position via web user interface:
1. Click on Setting->Preset.
2. Click Use to move local camera to the corresponding preset position.
Replacing the Stored Preset
You can replace the stored camera preset position with current camera preset positon.
To replace the stored camera preset position via web user interface:
1. Click on Setting->Preset.
2. Click , and then select Replace Preset.