Administrator’s Guide for Yealink VC110 Video Conferencing Endpoint
232
To add local contacts via web user interface:
1. Click on Directory->Local Directory.
2. Select Local from the pull-down list of New Contact.
3. Enter the desired name in the Name field.
4. Enter the desired number in the Number field.
5. Click Add Number, enter other number of the contact.
6. Select the desired contact bandwidth from the pull-down list of Bandwidth.
The default contact bandwidth is Auto. The endpoint will select the appropriate bandwidth
automatically
7. Click Confirm to accept the change.
To edit local contacts via web user interface:
1. Click on Directory->Local Directory.
2. Hover your cursor over the local contact you want to edit.
3. Click in the pop-up detail box.
4. Edit the contact information.
5. Click Confirm to accept the change.
To place calls to local contacts from the local directory via web user interface:
1. Click on Directory->Local Directory.
2. Hover your cursor over the desired local contact.
To Next Page
Loading...
