Yealink VC110 - Page 262

Administrator’s Guide for Yealink VC110 Video Conferencing Endpoint
246
Parameter
Description
Configuration Method
Available data bits are:
 7
 8
Default: 8
Note: It must be the same data bits
for both devices.
Parity
Configures the parity.
Available parity are:
 None
 Odd
 Even
 Space
Default: Space
Note: It must be the same parity for
both devices.
Web User Interface
Stop Bits
Configures the stop bits.
Available stop bits are:
 1
 2
Default: 1
Note: It must be the same stop bits
for both devices.
Web User Interface
To configure serial connection parameters via web user interface:
1. Click on Security->Security Control.
2. Select the desired value from the pull-down lists of Baud Rate.
3. Select the desired value from the pull-down lists of Data Bits.
4. Select the desired value from the pull-down lists of Parity.