Yealink VC110 - Page 296

Administrator’s Guide for Yealink VC110 Video Conferencing Endpoint
280
Parameter
Description
Configuration Method
Default: Local
Server Name
Specify the server address where the
log will be exported.
Note: It only works if the parameter
“Export System Log” is set to Server.
Web User Interface
System Log Level
Specify the endpoint log level.
Note: The supported level is 0-9.
Higher value indicates more detailed
content.
Default: 6
Web User Interface
To configure the endpoint log level via web user interface:
1. Click on Setting->Configuration.
2. Select the desired level from the pull-down list of System Log Level.
3. Click Confirm to accept the change.