VC110 Video Conferencing Endpoint Introduction
37
The VC110 is abnormal (e.g., network unavailable, update
failure).
Press the key on the remote control.
The VC110 is powered off.
Indicator LED on the video conferencing phone:
The phone is initializing.
The video conferencing phone is muted when the VC110 is
during a call.
The phone is placing a call.
There is an active call on the phone.
The phone is not connected to the cable hub.
The phone is idle.
Battery indicator LED on the VCM60 video conferencing wireless microphone:
The VCM60 is turned on within the first 5 seconds.
The battery capacity reaches 100% during charging.
The battery capacity can maintain less than 1 hour.
Mute indicator LED on the VCM60 video conferencing wireless microphone:
The VCM60 is searching for the dongle.
Green and in breathing
state
The VCM60 registers with the dongle, and then enters the
online standby mode.
The VC110 is placing a call.
The VC110 is in a call.
The VC110 is muted during a call.
The VCM60 enters registration mode.
The VCM60 fails to search for the dongle, and then enters
the offline standby mode.
The VCM60 is turned off.
The VCM60 runs out of battery.
To Next Page
Loading...
