Yealink VC110 - Page 117

Configuring Call Preferences
107
Parameter
Description
Configuration Method
Authentication is enabled, the
gatekeeper ensures that only
trusted H.323 endpoints are
allowed to access the
gatekeeper.
Gatekeeper
Username
Specifies the user name for
authentication with
gatekeeper.
Default: Blank
Remote Control
Web User Interface
Gatekeeper
Password
Specifies the password for
authentication with
gatekeeper.
Default: Blank
Remote Control
Web User Interface
H.460 Active
Enables or disables H.460
firewall traversal feature on the
endpoint.
Default: Disabled
For more information, refer to
H.460 Firewall Traversal on
page 88.
Remote Control
Web User Interface
H.323 Tunneling
Enables or disables the H.323
tunneling on the endpoint.
Default: Disabled
For more information, refer to
H.323 Tunneling on page 71.
Remote Control
Web User Interface
H235 Encryption
Specifies the H.235 type for the
H.323 account.
 Disabled—do not use
H.235 in H.235 calls.
 Enabled—negotiate with
the far site whether to use
H.235 for media encryption
in H.323 calls.
 Compulsory—compulsory
use H.235 for media
encryption in H.323 calls.
Default: Disabled
For more information, refer to
Web User Interface