Yealink VC110 - Using VCP41 with the PC or Mobile Device; Connecting a PC or Mobile Device to the VCP41

Configuring Endpoint Settings
131
Parameter
Description
Configuration
Method
Start Hour of Day
of the Daylight Saving Time is
set to Enabled.
DST Stop Month
When the DST calculation
method is set to By Week,
Configures the time to end
DST.
Note: It only works if the value
of the Daylight Saving Time is
set to Enabled.
Web User Interface
DST Stop Day of Week
DST Stop Day of Week Last
in Month
End Hour of Day
Offset(minutes)
Configures the DST offset time
(in minutes).
Valid values: -300 to +300.
Note: It only works if the value
of the Daylight Saving Time is
set to Enabled.
Web User Interface
Time Type
Configures the DST time type.
 SNTP: obtain the time
and date from the NTP
server automatically.
 Manual Time: configure
the time and date
manually.
Default: SNTP
Remote Control
Web User Interface
Time Format/ Time
Configures the time format.
 Hour12
 Hour24
Default: Hour 24
Remote Control
Web User Interface
Date Format/Date
Configures the date format.
 WWW MMM DD
 DD-MMM-YY
 YYYY-MM-DD
 DD/MM/YYYY
 MM/DD/YY
 DD MMM YYYY
 WWW DD MMM
Default: YYYY-MM-DD
Remote Control
Web User Interface