Yealink VC110 - Page 140

Administrator‘s Guide for Yealink VC110 Video Conferencing Endpoint
130
Parameter
Description
Configuration
Method
automatically.
You do not need to
manually configure the
start time, end time and
offset.
Default: Automatic
Fixed Type
Configures the DST
calculation methods.
 By Date- specifies the
month, day and hour to
be the DST start /end
date.
 By Week- specifies the
month, week, day and
hour the DST start /end
date.
Note: It only works if the value
of Daylight Saving Time is set
to Enabled.
Web User Interface
Start Date
When the DST calculation
method is set to By Date.
Configures the time to start
DST.
Note: It only works if the value
of the Daylight Saving Time is
set to Enabled.
Web User Interface
End Date
When the DST calculation
method is set to By Date.
Configures the time to end
DST.
Note: It only works if the value
of the Daylight Saving Time is
set to Enabled.
Web User Interface
DST Start Month
When the DST calculation
method is set to By Week.
Configures the time to start
DST.
Note: It only works if the value
Web User Interface
DST Start Day of Week
DST Start Day of Week Last
in Month